Sector 9 Sector 9 10" Gullwing Charger Longboard Truck

The Sector 9 Gullwing Charger Truck 10" is streamlined for super carve, yet wide for stability at speed. TRUCK SOLD INDIVIDUALLY Pivot redesigned for better freeriding and carving Updated larger bushings for increased stability Type: Revers...e Kingpin Application: Cruising, Carving Size: 9.0? (161 mm), 10.0? (183 mm) Geometry: 50 Degree Bushings: 89A Double Cone Item: 1646-TKC10 Read More

Sector 9
$28.95 at Paragon

The Sector 9 9" GW PRO 3 Truck: Return of the Cult Classic! 9" Wide Axle Metal Baseplate New and Old school Mounting Pattern Made ...in the USA Item: 1646-TKP3902 Read More

Z-Flex
$12.99 $19.95 at Paragon

The Z-Flex Reverse Longboard Truck feature 180mm powder coated, 45 degrees reverse kingpin, 6 hole baseplate and 87a soft cushions.... TRUCK SOLD INDIVIDUALLY 10" Axle 180mm powder-coated 45 degree reverse truck 6 hole baseplate 87A soft cushions Item: 2733-ZFX08 Read More

Eastern
$27.99 at Paragon

The Eastern Randal Truck is the killer new truck for carving tight turns on minis, retros, slalom and surf skates. Maintain stabil...ity at higher speeds, through turns and while pushing. 42 degree Base plates are more stable while compensating for a shorter wheel base. Randal II geometry allows for adjusting caster angle by flipping the hanger. From the company that pioneered the downhill truck market. SINGLE TRUCK PURCHASE Base plates and hangers interchangeable with the Randal System. Virgin grade aluminum Grade 8 'cast in' axles New raw finish Stock with Randal Yellow bushings Grade 8 king pin Lifetime Guarantee Made in the USA Item: 660-RANDALTRUCKS Read More

Sector 9
$27.95 at Paragon

The Sector 9 Gullwing Charger Truck 10" is streamlined for super carve, yet wide for stability at speed. TRUCK SOLD INDIVIDUALLY P...ivot redesigned for better freeriding and carving Updated larger bushings for increased stability Type: Reverse Kingpin Application: Cruising, Carving Size: 9.0? (161 mm), 10.0? (183 mm) Geometry: 50 Degree Bushings: 89A Double Cone Item: 1646-TKC10 Read More

Eastern
$28.95 at Paragon

The Paris V2 180mm Truck is the all-around and perfect any terrain truck. This Truck is able to handle anything and everything you... could possibly throw at it. The 180mm hanger is the perfect go-to size for most decks and compliments all riding styles. Like all Paris Trucks, the baseplate angle is 50 degrees, which provides the perfect balance between stability and maneuverability. All Paris Trucks are built with 90a Divine bushings with the exception of the Adam Colton ? The Adam Colton truck comes with 86a Divine Bushings. TRUCK SOLD INDIVIDUALLY Recomended for: Boards around 9-10? wide Perfect in-between size 356.2 virgin aluminum gravity molded baseplate and hanger Secondary heat treatment process for added strength and durability Faced Hangers Branded Grade 8 steel axles and kingpins 6-hole baseplate drilled both new school and old school Divine 90a Urethane bushing formula for ultimate rebound and vibration dampening Available in multiple colorways Item: 42-PARIS-180-COL Read More

Eastern
$28.00 at Paragon

The Landyachtz Bear Grizzly 852's Truck: A great all round truck, whether your commuting, cruising, or going fast down hills. The ...2010 Grizzly's are a completely gutted, redesigned version of the already great Bear Grizzly's. All the goods of the 2009's are still here, including the sweet-spot 181 mm axle width, flippable hanger for cruising and bombing options, and a baseplate shape/hole pattern to mount to just about any board out there today including drop-through's. Stronger and Lighter fine tuned to fit any standard 24 mm diameter bushing on top or bottom baseplate and hanger turn at 52 degrees Positive (standard) and negative (flipped) leverage axle placement helps you change your setup from general carving to a stable hill bombing machine in seconds Geometry and bushing seats will give you the best combination of lean, rebound, and response possible Axles are heat treated, so the chance of you bending an axle is greatly reduced Hardware to mount to the board is sold separately Item: 3006-GR852 Read More

Sector 9
$21.99 at Paragon

Smooth curving down the streets with the 8" Gullwing Mission Trucks. Made to last this trucks feature a 89A cone and barrel combo ...bushings. TRUCK SOLD INDIVIDUALLY Gullwing?s basic conventional carving truck 6 Hole mounting pattern for both old and new school setups Taller ride height for reduced wheel bite Compatible with Pro III products Type: Conventional, Carving Applications: Carving, Cruising Size: 8.375? (140mm) Geometry: Standard, Conventional Bushings: 89A Cone and Barrel Combo Item: 1646-TKM8 Read More

Eastern
$26.00 at Paragon

The Paris 150mm Truck are your go-to carving truck. All Paris Trucks are built with 90a Divine bushings with the exception of the ...Adam Colton. The Adam Colton truck comes with 86a Divine bushings. If you?re looking to cut some serious turns and get your carve on, then these babies are for you. Like all Paris Trucks, the baseplate angle is 50 degrees, which provides the perfect balance between stability and maneuverability. The 150mm hanger allows for quicker turning and greater leverage when compared to a wider hanger. TRUCK SOLD INDIVIDUALLY 356.2 virgin aluminum gravity molded baseplate and hanger Secondary heat treatment process for added strength and durability Grade 8 steel axles and kingpins 6-hole baseplate drilled both new school and old school Special Divine Urethane bushing formula for ultimate rebound and vibration dampening Manufacturers Lifetime Guarantee Item: 42-PARIS-150-RAW Read More

Eastern
$24.99 $32.95 at Paragon

The ultimate longboard truck. The Fifty Caliber is stable at high speeds while also having an optimal angle for making strong carv...es. The hanger is not only reversible, but when flipped there is no rake to throw off the ride. The bushing seats are symmetrical with an optimal setup for any style of bushing. The pivot of the baseplate is self-contained, keeping it from having any weakness. The Blood Orange Bushings at a medium durometer make for an ideal responsiveness. Perfection? TRUCK SOLD INDIVIDUALLY Item Type: Cast Discipline: Downhill Truck Width: 10" Baseplate Angle: 50 degrees Item: 660-CALIBER-COLOR Read More

NHS
$25.95 at Paragon

New Stage 11 standard height trucks are unquestionably the best combination of features and geometry Independent has ever produced.... By improving the modern performance features and iconic look of our Stage 10 design with newly reworked geometry based on Independent Stages 5-7 Independent has created the new standard to which all other trucks will be judged. Independent uses only the best materials: 356 T6 Aluminum Hangers and Baseplates 4140 Chromoly Steel Axles Grade 8 Kingpins New Stage 11s feature improved performance features like: Improved turning: turn into and out of things easier Improved stability on landings and at high speeds Less wheels bite Better overall grind clearance Improved ?No Hang-up? yoke Longer lasting Stronger on impact Hanger width: 215 Made In The USA Item: 2075-33131523-57982 Read More

NHS
View wishlist Continue shopping