Refine By

Cybex Car Safety

Cybex
$299.95 at Target

The Cybex Aton 2 Infant Car Seat and Base is an extremely light weight carrier that weighs only 8.8 lbs. Designed for children 4-3...5 pounds and up to 30 inches, this baby seat is compatible with the Cybex Onyx and Callisto strollers plus many name brand strollers to make a perfect travel system! LOAD LEG TECHNOLOGYProven to reduce risk of injury in Europe, now available in the U.S.Provides additional coupling between the Aton 2 and the vehicle structure, allowing the Aton 2 to more effectively absorb crash energy.Reduces forward pitching of the Aton 2 keeping the child in the prescribed orientation during the entire crash. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. Special Note: The Aton 2 has also been tested and passed to be used with the Load Leg folded up under the base in the event there is a hump on the floor of the vehicle if using the car seat in the center position of the vehicle making it impossible to use the Load Leg as it can push the base up off the vehicle seat. ENHANCED SIDE IMPACT PROTECTIONEnergy absorbing shell, fully lined with EPS foam, provides enhanced side impact protection.Linear Side-Impact Protection (LSP). The LSP side protectors transfer the initial impact of a side crash to the shell.The optimized structure of the shell absorbs the forces and channels them away from your baby for increased safety. MORE FEATURESNEWBORN INLAY - Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion. INFANT INSERT - Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children. INTEGRATED DESIGNER CANOPY? - Provides UV50+ sun protection for your child while maintaining the sleek style of the Aton. Folds away for discreet and stylish travel.THREE POSITION HANDLE - Can be used in carry, storage and resting positions.DUAL ACTION RELEASE - A green "safety" button indicates a secure connection between the carrier and the base. This button also forms part of a two-step process needed to remove carrier from the base, preventing an accidental release. The overall weight of the carrier has been reduced by integrating the release mechanism into the base.RECLINE FOOT AND LEVEL INDICATOR - A four-position, spring activated leveling foot makes reclining the Aton easy. The level indicator with dual weight ranges help you make sure your seat is reclined at the proper angle according to the weight of your child.STEEL CHASSIS - A solid steel spine in the base creates metal to metal contact through the base, infant carrier, and the vehicle for added strength and properly managed crash forces.FIVE POINT HARNESS - Provides a secure fit and contacts your baby at the stronger parts of the body to better distribute crash energy. Harness equipped with shoulder and buckle pads.LATCH and COLOR-CODED BELT GUIDES - To aid in proper installation of vehicle belts. Latch guides aid with installation using LATCH is included with every seat Features: Buckle Closure, three position handle, Removable Head Support, Removable Seat Pad, Adjustable Height, Quick Release, Adjustable Harness, LATCH Compatiblity, Level Indicator For Proper Installation, Shoulder Pads, EPS Safety Foam, UV 50+ ProtectionIncludes: belt tensioning plate, latch guides, Baby seat insert, Car Seat Base, Car SeatSafety and Security Features: Side Impact Protection, load leg, Rear Facing Only, LATCH Equipped Car Seat, Car Seat Anchors, 5-Point Harness, Compatible with Shoulder Seat Belt, 2- Piece Chest Clip, Compatible with Lap Seat BeltCar Seat Safety Stage: Stage 1Care and Cleaning: Wipe Clean with a Damp Cloth, Clean with Water and Mild Detergent, Machine Wash, Wipe Clean With Soap and WaterRear Facing:Minimum Weight: 4 Lb.; Maximum Weight: 35 Lb., Maximum Height: 30 "Material: Plastic, Polyester, SteelProtective Qualities: UV ProtectionAwards: 20 Read More

Cybex
$299.95 at Albee Baby

Car seat includes base. INNOVATIONS IN SAFETY The new Aton 2 brings two new safety innovations to the U.S. market. Adjustable Load... Leg The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. Linear Side Impact Protection (LSP) The LSP side protectors on the Aton 2 transfer the initial impact of a side impact to the seats shell. The optimized structure of the shell absorbs the forces and channels them away from your baby resulting in a 40% increase in safety. World Class Safety Excellent Side Impact Protection: The LSP devices in combination with the flexible, energy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Aton 2 offers dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?35 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred ""European"" method where the shoulder belt wraps around the front of the carrier adding additional stability. A Steel Chassis: A solid steel spine running through the Aton 2 Base creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. EASY INSTALLATION Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to use. Innovative Belt Tensioner: The Aton 2 Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton 2 easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Adjustable Load Leg Foot: The foot of the Load Leg adjusts from 10 to 18 inches to allow firm contact between the foot of the Load Leg and the vehicle floor. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton 2 Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and no Read More

Cybex
$159.95 at Target

CYBEX Aton 2 Base Base for Aton and Aton 2 Rear Facing Infant Car Seats Fits both Aton and Aton 2: ENGINEERED FOR SAFETY Introduci...ng the Aton Base 2 which is the first base to bring an European style adjustable Load Leg to the United States market. ADJUSTABLE LOAD LEG The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Base 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. * Note: If the load leg cannot be deployed it can be folded under the base and the base used without it provided a secure installation can be achieved. STEEL CHASSIS A solid steel spine running through the Aton Base 2 (shown in blue) creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. No other base features this type of steel structure. Steel Chassis DUAL WEIGHT RANGES Dual Weight Ranges The dual weight ranges of the Base help to make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?35 pounds. DUAL ACTION RELEASE / Dual Action Release Safety A green safety button indicates a secure connection has been made between the infant carrier and the Base. This button is part of a two-step process needed to remove the Aton Infant Carrier from the Base 2, preventing an accidental release. EASY INSTALLATION Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to install in your vehicle. INNOVATIVE BELT TENSIONER The Base 2 uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. ADJUSTABLE LOAD LEG FOOT Simply squeeze the release handle on the Load Leg to lower the foot to the vehicle floor. The leg adjusts from 10 to 18 inches to allow firm contact between the foot and the vehicle floor. RECLINE FOOT A four-position, spring activated leveling foot makes reclining the Base 2 easy. The dual range level indicator makes sure your child is reclined at the proper angle according to his weight. PREMIUM LATCH CONNECTORS We use only premium LATCH Connectors on our Base 2, making for a quick and easy installation. LATCH Connectors can be stored inside the Base 2 when not in use. FREE LATCH GUIDES LATCH Guides easily hook onto your vehicle's lower LATCH anchors to help make car seat installation easier while protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. **Not compatible with hook-type Lower LATCH Connectors. SPECIFICATIONS Max Width 15" Height Min: 5" / Max: 8" Length 21.5" Load Leg Length Min: 10.75" / Max: 18.75" Weight 12.2 lbs Features: Quick Release, LATCH Compatiblity, Level Indicator For Proper Installation, Adjustable HeightIncludes: Car Seat Base, belt tensioning plate, latch guidesCompatible With: Cybex car seatsSafety and Security Features: Car Seat Anchors, LATCH Equipped Car Seat, Rear Facing Only, Compatible with Lap Seat Belt, load legCar Seat Safety Stage: Stage 1Care and Cleaning: Wipe Clean with a Damp Cloth, Clean with Water and Mild Detergent, Wipe Clean With Soap and WaterMaterial: Plastic, SteelDimensions: 26.5 " H x 15.0 M W x 21.5 " D Weight: 12.2 Lb.Battery no battery usedAssembly Details: adult assembly requiredCertifications: Meets FMVSS 213, Meets Federal Motor Vehicle Safety Standards Read More

Cybex
$299.95 at Albee Baby

Car seat includes base. INNOVATIONS IN SAFETY The new Aton 2 brings two new safety innovations to the U.S. market. Adjustable Load... Leg The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. Linear Side Impact Protection (LSP) The LSP side protectors on the Aton 2 transfer the initial impact of a side impact to the seats shell. The optimized structure of the shell absorbs the forces and channels them away from your baby resulting in a 40% increase in safety. World Class Safety Excellent Side Impact Protection: The LSP devices in combination with the flexible, energy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Aton 2 offers dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?35 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred ""European"" method where the shoulder belt wraps around the front of the carrier adding additional stability. A Steel Chassis: A solid steel spine running through the Aton 2 Base creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. EASY INSTALLATION Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to use. Innovative Belt Tensioner: The Aton 2 Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton 2 easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Adjustable Load Leg Foot: The foot of the Load Leg adjusts from 10 to 18 inches to allow firm contact between the foot of the Load Leg and the vehicle floor. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton 2 Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and no Read More

Cybex
$249.95 at Albee Baby

Car seat includes base. ENGINEERED FOR SAFETY Enhanced Side Impact Protection: A combination of materials such as a flexible, ener...gy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Atons dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?32 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred "European" method where the shoulder belt wraps around the front of the carrier adding additional stability. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. A Steel Chassis: A solid steel spine running through the Aton Base creates metal to metal contact through the Base, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. EASY INSTALLATION Innovative Belt Tensioner: The Aton Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. *Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and not the Carrier. Integrated Canopy: The unique integrated fold-away canopy provides SPF 50+ sun protection for your child while maintaining the sleek style of the Aton. Three Position Handle: A three position handle accomodates carrying and driving, resting, and storage when needed. Premium Fabrics: Super soft, extra padded covers complete with shoulder and buckle pads comfort your child while in the Aton. Infant Insert: Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children. Newborn Inlay: Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion. Travel System: The CYBEX Aton can be paired with any CYBEX stroller for an ultra chic urban travel system. SPECIFICATIONS Seat Type: Rear Facing Infant Child Weight: 4 to 32 lbs Child Height: 30 inches or less Infant CarrierCarrier On Base Max Width17.2517.25 Seat Height/Top of Handle15.25/2117/24 Length2526 Shoulder Width1010 Harness Slot Heights7,9,10.5 (Without Insert: 8,10,11.5)- Weight8.819 Read More

Cybex
$299.95 at Albee Baby

Car seat includes base. INNOVATIONS IN SAFETY The new Aton 2 brings two new safety innovations to the U.S. market. Adjustable Load... Leg The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. Linear Side Impact Protection (LSP) The LSP side protectors on the Aton 2 transfer the initial impact of a side impact to the seats shell. The optimized structure of the shell absorbs the forces and channels them away from your baby resulting in a 40% increase in safety. World Class Safety Excellent Side Impact Protection: The LSP devices in combination with the flexible, energy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Aton 2 offers dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?35 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred ""European"" method where the shoulder belt wraps around the front of the carrier adding additional stability. A Steel Chassis: A solid steel spine running through the Aton 2 Base creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. EASY INSTALLATION Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to use. Innovative Belt Tensioner: The Aton 2 Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton 2 easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Adjustable Load Leg Foot: The foot of the Load Leg adjusts from 10 to 18 inches to allow firm contact between the foot of the Load Leg and the vehicle floor. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton 2 Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and no Read More

Cybex
$299.95 at Albee Baby

Car seat includes base. INNOVATIONS IN SAFETY The new Aton 2 brings two new safety innovations to the U.S. market. Adjustable Load... Leg The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward. Linear Side Impact Protection (LSP) The LSP side protectors on the Aton 2 transfer the initial impact of a side impact to the seats shell. The optimized structure of the shell absorbs the forces and channels them away from your baby resulting in a 40% increase in safety. World Class Safety Excellent Side Impact Protection: The LSP devices in combination with the flexible, energy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Aton 2 offers dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?35 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred ""European"" method where the shoulder belt wraps around the front of the carrier adding additional stability. A Steel Chassis: A solid steel spine running through the Aton 2 Base creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. EASY INSTALLATION Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to use. Innovative Belt Tensioner: The Aton 2 Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton 2 easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Adjustable Load Leg Foot: The foot of the Load Leg adjusts from 10 to 18 inches to allow firm contact between the foot of the Load Leg and the vehicle floor. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton 2 Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and no Read More

Cybex
$249.95 at Albee Baby

Car seat includes base. ENGINEERED FOR SAFETY Enhanced Side Impact Protection: A combination of materials such as a flexible, ener...gy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Atons dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?32 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred "European" method where the shoulder belt wraps around the front of the carrier adding additional stability. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. A Steel Chassis: A solid steel spine running through the Aton Base creates metal to metal contact through the Base, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. EASY INSTALLATION Innovative Belt Tensioner: The Aton Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. *Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and not the Carrier. Integrated Canopy: The unique integrated fold-away canopy provides SPF 50+ sun protection for your child while maintaining the sleek style of the Aton. Three Position Handle: A three position handle accomodates carrying and driving, resting, and storage when needed. Premium Fabrics: Super soft, extra padded covers complete with shoulder and buckle pads comfort your child while in the Aton. Infant Insert: Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children. Newborn Inlay: Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion. Travel System: The CYBEX Aton can be paired with any CYBEX stroller for an ultra chic urban travel system. SPECIFICATIONS Seat Type: Rear Facing Infant Child Weight: 4 to 32 lbs Child Height: 30 inches or less Infant CarrierCarrier On Base Max Width17.2517.25 Seat Height/Top of Handle15.25/2117/24 Length2526 Shoulder Width1010 Harness Slot Heights7,9,10.5 (Without Insert: 8,10,11.5)- Weight8.819 Read More

Cybex
$650.00 at Albee Baby

Car seat includes base. The CYBEX Aton 2 builds upon the strengths of the Aton, and brings two innovative safety technologies to t...he US. The Aton Base 2 is the first base to bring an European style adjustable Load Leg to the United States market. The Aton 2 Carrier offers a 40% increase in side impact protection with innovative Linear Side Impact Protection. The Aton 2 incorporates a Load Leg and Linear Side-Impact Protection (LSP). The Load Leg deploys from under the Base of the Aton 2 and extends to the floor of the vehicle. After installing the Aton 2 Base with the patented Belt Tensioning Plate which helps to insure a secure installation with either LATCH or vehicle belts, simply extend the Load Leg to the floor of the vehicle for unsurpassed safety. The Load Leg provides additional coupling between the Aton 2 and the vehicle, to pick up and distribute the crash forces more quickly and effectively in a crash. Additionally, the Load Leg tremendously reduces forward rotation of the infant seat on impact keeping your baby in the prescribed more upright position, which reduces stretching on the spine caused if the seat pitches too far forward. The energy absorbing shell, fully lined with EPS foam, provides enhanced side impact protection. The addition of the Linear Side Impact Protection (LSP) transfers the initial impact to the shell more quickly, allowing the shell to absorb and transfer the energy away from your baby, improving safety in a side impact collision by up to 40%. For children 4-35 lbs and up to 30 inches European Style Load Leg Linear Side Impact Protection Integrated Designer Canopy Carrier weighs less than 10 pounds (4.5 kg) Newborn Inlay helps position smaller babies Infant Insert gives stability and head and torso Dual Weight Ranges European Install Options Double Action Carrier Release Steel Chassis Travel System Includes LATCH Guides Read More

Cybex
$239.99 $269.99 at Albee Baby

Car seat includes base. ENGINEERED FOR SAFETY Enhanced Side Impact Protection: A combination of materials such as a flexible, ener...gy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Atons dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?32 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred "European" method where the shoulder belt wraps around the front of the carrier adding additional stability. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. A Steel Chassis: A solid steel spine running through the Aton Base creates metal to metal contact through the Base, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. EASY INSTALLATION Innovative Belt Tensioner: The Aton Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. *Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and not the Carrier. Integrated Canopy: The unique integrated fold-away canopy provides SPF 50+ sun protection for your child while maintaining the sleek style of the Aton. Three Position Handle: A three position handle accomodates carrying and driving, resting, and storage when needed. Premium Fabrics: Super soft, extra padded covers complete with shoulder and buckle pads comfort your child while in the Aton. Infant Insert: Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children. Newborn Inlay: Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion. Travel System: The CYBEX Aton can be paired with any CYBEX stroller for an ultra chic urban travel system. SPECIFICATIONS Seat Type: Rear Facing Infant Child Weight: 4 to 32 lbs Child Height: 30 inches or less Infant CarrierCarrier On Base Max Width17.2517.25 Seat Height/Top of Handle15.25/2117/24 Length2526 Shoulder Width1010 Harness Slot Heights7,9,10.5 (Without Insert: 8,10,11.5)- Weight8.819 Read More

Cybex
$189.99 $269.99 at Albee Baby

Car seat includes base. ENGINEERED FOR SAFETY Enhanced Side Impact Protection: A combination of materials such as a flexible, ener...gy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions. Dual Weight Ranges: The Atons dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4?22 pounds and the other, 22?32 pounds. European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred "European" method where the shoulder belt wraps around the front of the carrier adding additional stability. Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection. A Steel Chassis: A solid steel spine running through the Aton Base creates metal to metal contact through the Base, infant carrier, and the vehicle for added strength and properly managed crash forces. Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release. Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel. EASY INSTALLATION Innovative Belt Tensioner: The Aton Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install. Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton easy. The dual ranges level indicator makes sure your child is reclined at the proper angle. Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use. Free Latch Guides: LATCH Guides easily hook onto your vehicles lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles. *Not compatible with hook-type Lower LATCH Connectors. COMFORT FOR BABY AND YOU CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday. Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and not the Carrier. Integrated Canopy: The unique integrated fold-away canopy provides SPF 50+ sun protection for your child while maintaining the sleek style of the Aton. Three Position Handle: A three position handle accomodates carrying and driving, resting, and storage when needed. Premium Fabrics: Super soft, extra padded covers complete with shoulder and buckle pads comfort your child while in the Aton. Infant Insert: Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children. Newborn Inlay: Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion. Travel System: The CYBEX Aton can be paired with any CYBEX stroller for an ultra chic urban travel system. SPECIFICATIONS Seat Type: Rear Facing Infant Child Weight: 4 to 32 lbs Child Height: 30 inches or less Infant CarrierCarrier On Base Max Width17.2517.25 Seat Height/Top of Handle15.25/2117/24 Length2526 Shoulder Width1010 Harness Slot Heights7,9,10.5 (Without Insert: 8,10,11.5)- Weight8.819 Read More

View wishlist Continue shopping